Scanner (Handheld USB Barcode Scanner) | Honeywell Brand | Model 1950
This article applies to Honeywell 1900XXX/1950XXX
FACTORY RESET
If the above barcode doesn't work initially, the scanner may need to be reset back to factory. Please follow the instructions below.
RESET TO FACTORY
- First scan the Remove Custom Defaults barcode,
- Scan Activate Defaults. This resets to the factory default settings.
REPROGRAM SCANNER AFTER FACTORY RESET
To ENABLE a Carriage Return (CR) or Horizontal Tab (HT) After Each Scan
-
Remove any existing suffix by scanning the following barcode:
-
Scan any of the following barcodesto add the desired suffix:
-
To add an “ENTER” (CR) after each scan:
- To add a “TAB” (HT) after each scan:
To Disable Adding a Carriage Return (CR) or Horizontal Tab (HT) After Each Scan
-
Scan the barcode below to disable the Carriage Return, the Horizontal Tab, or any other suffix configured on a barcode scanner:
Clear All Suffixes
